FAQ

How to assign a static IP address?

(:Last updated)

There are two ways to assign static IP addresses.
1. Set the DHCP of the logical network to enable (default) and enter the static IP address on the attached screen of the logical network when creating the virtual server. In this case, as seen from the OS layer, the corresponding vNIC is addressed by DHCP, but in effect, the IP address entered above is allocated, thereafter basically no need to modify.

2. Set DHCP of the logical network to disable and enter a static IP address on the attached screen of the logical network when creating the virtual server. In this case, since the IP address is not set from the OS layer at the time of server creation, log in at the console and set the IP address you entered earlier in the OS layer.

In either method, there is no way that the instance can not be controlled from the GUI (for example, PowerOn / OFF can not be done, etc). However, the IP address seen from the cloud computing control panel and the IP address seen from the OS layer must be matched. Please be careful.

We recommend 1. In case of selected 2, please refer notes.

Is this page helpful?

Yes No
  • ECL2.0
  •  
  • Virtual Server
  •  

Related Pages

We appreciate your cooperation in improving the site

Did this FAQ be helpful? If you have any comments, please let us know.

Thank you

Your feedback has been received.