FAQ(ECL2.0)
Firewall (Brocade 5600 vRouter) - FAQ
- All(57)
-
How to switch the VM (with HA function) intentionally when hypervisor failure on a trial basis?ECL2.0, Firewall (Brocade 5600 vRouter), Firewall (vSRX), Load Balancer, Virtual Server
Sorry, it is not able to switch the virtual server, Firewall (Brocade 5600 vRouter)(vSRX) or Load Balancer(NetScaler VPX) intentionally as trial basis(in purpose of HA)
- How to set up the NAT configuration from a destination IP address/port number to a destination IP address?ECL2.0, Firewall (Brocade 5600 vRouter)
-
The status of Firewall (Brocade 5600 vRouter) displayed on portal has been changed from "Active" to "Shutoff".ECL2.0, Firewall (Brocade 5600 vRouter)
It might have some troubles so you should not operate for yourself and should ask us via Ticket System.
-
Let me know the priority (master/backup) when I register VRRP on Firewall(Brocade 5600 vRouter).ECL2.0, Firewall (Brocade 5600 vRouter)
The priority is basically decided depending on "priority" value configured in each Firewall. When both Firewalls have the same "priority" value, it is decided depending on big and small of IP address of the interface.
-
How to edit the default gateway of Firewall (Brocade 5600 vRouter)?ECL2.0, Firewall (Brocade 5600 vRouter)
You can edit the default gateway of Firewall (Brocade 5600 vRouter) via Portal/API provided by ECL2.0. You cannot do it via Portal/API/CLI provided by Brocade 5600 vRouter.
Tutorials - Firewall (Brocade 5600 vRouter) - Firewall Instance Operation Method
-
Let me know the order in which the filter rules are executed on Firewall (Brocade 5600 vRouter).ECL2.0, Firewall (Brocade 5600 vRouter)
When you set multiple filter rules on Firewall (Brocade 5600 vRouter), the rules are executed in numeric sequence, according to the rule number, from lowest to highest.
Reference: Brocade 5600 vRouter Userguide
Brocade 5600 vRouter Firewall Configuration Guide - Firewall rules(Excerpt)
Rules are executed in numeric sequence, according to the rule number, from lowest to highest. If the traffic matches the characteristics specified by a rule, the action of the rule is executed; if not, the system “falls through” to the next rule. -
What should I do when I found the operation that cannot be performed by user-admin account in Brocade 5600 vRouter?ECL2.0, Firewall (Brocade 5600 vRouter)
Please ask us via Ticket System.
-
How to build a configuration of Firewall (Brocade 5600 vRouter) that uses only one global IP?ECL2.0, Firewall (Brocade 5600 vRouter)
Since the Internet gateway is redundant with VRRP, you need to assign three IP addresses.
If you use only one global IP, the following settings are required.
1. Build the logical network with private IP address
2. Connect the Internet gateway to the logical network created in 1
3. Connect the firewall or VM to the logical network created in 1, and configure NAT so that the connection to /32 global IP can be translated.
4. Set up the Internet gateway; a static route with /32 global IP as the destination, the firewall or VM created in 3 and VM as the next hopService Descriptions - Internet Connectivity - Description of Functions
* More specific setting methods are outside our support range.
-
Please tell me how to set up the VRRP function.ECL2.0, Firewall (Brocade 5600 vRouter)
We have disclosed Operation-confirmed setting examples and Usage model operation confirmed, so please refer to them.
* VRRP Function
/en/documents/tutorials/rsts/Firewall/vyatta/command.html -
Please tell me how to set NAT function.ECL2.0, Firewall (Brocade 5600 vRouter)
We have disclosed Operation-confirmed setting examples, so please refer to them.
* NAT function
/en/documents/tutorials/rsts/Firewall/fwnetwork/nat/index.html