FAQ（ECL2.0）

Monitoring - FAQ

• All(19)
• Operation(11)
• Specification(18)
• Construction(7)

• Is it possible to monitor the traffic passing through Firewall(Brocade 5600 vRouter)?ECL2.0, Monitoring

  In the ECL 2.0 monitoring menu, you can check IN / OUT traffic (bps) for each interface at 5 minutes intervals.

  Service Descriptions - Monitoring - Data Collection/Accumulation - Firewall

  Is this page helpful?

  Yes No

  Open in a new window
• How to collect data, generate graphs and report for virtual server memory usage by using Monitoring menu?ECL2.0, Monitoring, Virtual Server

  For virtual server memory usage (and others that are not included in the meters provided as standard in Monitoring menu), you can use Monitoring function (graph display, alert setting, etc.) by using Custom Meter.

  There are two methods to use Custom Meter. You can choose either or both of them according to your environment.

  1. Use a custom meter agent
  (Note: Windows OS is not included in the target operating system)

  2. Create and use a script (for collecting data and sending it to the monitoring server)
  (Note: The script needs to be prepared by customers)

  Please refer to the tutorial below for detailed procedure on each method.
  Service Descriptions - Monitoring - Custom Meter
  Tutorials - Monitoring - Use Custom Meter

  Is this page helpful?

  Yes No

  Open in a new window
• On Monitoring Control Panel, CPU utilization of Virtual Server Instance sometimes exceed 100%. Is this normal?ECL2.0, Monitoring, Virtual Server

  Yes. The maximum value is “100 percent x number of CPU cores”. (Example: If the virtual server instance is 16 CPUs, the value ranges from 0 to 1600 percent.)
  So CPU Utilization may exceed 100%, depending on the flavor of the virtual server.

  Reference:
  Service Description - Monitoring - Data Collection/Accumulation - Virtual Server Instance

  Service Description - Virtual Server - Plan List

  Is this page helpful?

  Yes No

  Open in a new window
• What are the differences between "GW-IF alive monitoring" and "IF alive monitoring" of VPN Connectivity?ECL2.0, Monitoring, VPN Connectivity

  They are the functions to monitor the inside and outside interfaces of the VPN gateway, respectively.

  GW-IF alive monitoring:　Logical NW side

  IF alive monitoring:　Cloud GW side (UNO side)

  Is this page helpful?

  Yes No

  Open in a new window
• There is a difference between the value obtained by Monitoring and the value checked on the guest OS for the CPU usage rate of the virtual server.ECL2.0, Monitoring

  The data of the virtual server displayed on Monitoring service is acquired from the hypervisor housing the virtual server and this information includes not only the load of the guest OS but also overhead load due to virtualization.
  Therefore, the CPU usage rate displayed on Monitoring service may be different from the CPU usage rate displayed on the guest OS.

  Is this page helpful?

  Yes No

  Open in a new window
• Does the e-mail address that can be specified as the alarm mail sending destination address in the monitoring menu need to be the e-mail address of the user who can access Smart Data Platform Portal?ECL2.0, Monitoring

  No. It is not necessary to be the e-mail address of users who can access Smart Data Platform Portal.
  An arbitrary mail address can be set as the mail address that can be specified as the alarm mail sending destination address in the monitoring menu.
  Reference: Tutorials - Monitoring - Creating Monitoring Alarm

  Is this page helpful?

  Yes No

  Open in a new window
• How can I create Monitoring Alarms ?ECL2.0, Monitoring

  For details on Monitoring Alarm setting, please refer to the Tutorials.

  Tutorials - 9.3.1. Creating Monitoring Alarm

  Is this page helpful?

  Yes No

  Open in a new window
• The set alarm is not notified.ECL2.0, Monitoring

  Alarm notification mail is sent from the following address, so please check whether the target mail is blocked.
  monitoring-notification@ecl.ntt.com

  Also, if you press the "+ Add" button on the right side of the "Define Your Alarm action" screen, it will be displayed in [Added Actions].
  After confirming that it is displayed in the list, please click "Save Alarm" button at the bottom right of the screen and save it.

  Please refer to the tutorial for reference example of setting.

  9.3.1. Creating Monitoring Alarm
  https://ecl.ntt.com/en/documents/tutorials/rsts/Monitoring/alarm/alarm_setup.html

  Is this page helpful?

  Yes No

  Open in a new window
• Which items of monitoring that can use the monitoring function?ECL2.0, Monitoring

  This function collects data from various resources for the relevant monitoring items.

  Please refer to Service Description - Data Collection/Accumulation for details.

  Is this page helpful?

  Yes No

  Open in a new window
• How many Monitoring Alarms can I use for free?ECL2.0, Monitoring
  you can use 10 Alarms per tenant for Free in Basic Plan.

  In Advanced plan, you can use up to 100 Alarms per tenant.

  For more than 101 items, a monthly fee is added for each one up to 300 per tenant.

  Please also refer to Service Descriptions.

  Is this page helpful?

  Yes No

  Open in a new window