FAQ(ECL2.0)
Internet Connectivity - FAQ
- All(20)
- Operation(5)
- Specification(9)
- Construction(4)
- The following error occurred when creating the gateway interface. ”One or more of the IPs defined in the GW Interface resource did not pass the validation!”ECL2.0, Internet Connectivity
Please confirm the following about the IP address you are setting.
The IP addresses that can be assigned to the gateway interface of the Internet gateway are as follows.
--------------------------
・Private IP address
10.0.0.0/8
172.16.0.0/12
192.168.0.0/16・Global IP address which assigned by Internet Gateway(contracted for this service)
【Reference】
Service Descriptions - Internet Connectivity - Internet Gateway Function
-------------------------- - Is it necessary to consider broadcast address etc. when applying for global IP provided by Internet connectivity on a subnet basis?ECL2.0, Internet Connectivity
- Is it possible to change the number of global IPs without changing the global IP address acquired first on the Internet?ECL2.0, Internet Connectivity
It is impossible to change the address range of the global IPs once acquired.
To change the global IP address range, there is only a way to reacquire it after deletion of the global IP, in that case, it will be changed from the global IP you have been using.
- How many Global IP addresses can I register per Tenant?Internet Connectivity
You can use the uppermost up to 4 Global IP addresses per Tenant.
You can apply for each subnet of [/32] - [/28].Service Descriptions - Internet Connectivity - Important Notes of Subscription