Enterprise Cloud Knowledge Center
Close the Menu
Home > Enterprise Cloud 1.0 Support Information > FAQ - Enterprise Cloud 1.0 > Can we change server segment NW address and subnet mask after deployment?

FAQ

Can we change server segment NW address and subnet mask after deployment?

(:Last updated）

No, you can't modify server segment NW address and subnet mask after deployment. You need to delete the segment and recreate it.

Is this page helpful?

Yes No
  • ECL1.0
    •  
  • Network
    •  

Related Pages

  • Do I have to manually advertise IP addresses that belong to the VPN Transit section?Network

    No. IP addresses that belong to the VPN Transit section are advertised by default. There is no need for manual setting.

    Is this page helpful?

    Yes No
    Open in a new window
  • What connection plan is available for the Customer Portal available VPN Connectivity service?Network

    Best Effort 100Mbp plan is available.

    Is this page helpful?

    Yes No
    Open in a new window
  • In the VPN service, is it possible to make multiple connections to the same VPN from ECL 1.0 network that has different contracts?Network

    Yes, it is possible.
    However, if you are using Customer Portal available VPN Connectivity service, you can only make simultaneous connections up to 10 sessions.

    Is this page helpful?

    Yes No
    Open in a new window
  • I tried the Ping option of VPN Gateway on Customer Portal available VPN connection, but Ping fails. Why is this?Network

    Please check the filters along the path whether Ping packets are not filtered on vFirewall, etc.

    Is this page helpful?

    Yes No
    Open in a new window
  • I am using Red Hat Enterprise Linux Server 5 / 6 or later and why does my VMware Tools not start?Network

    Kernel update may be the problem.
    Please log in to guest OS and execute the commands below.

    #/usr/bin/vmware-config-tools.pl

    Ex.

    [root@localhost ~]# /usr/bin/vmware-config-tools.pl
Initializing...
Making sure services for VMware Tools are stopped.
vmware-tools stop/waiting
[EXPERIMENTAL] The VMware FileSystem Sync Driver (vmsync) is a new feature that
creates backups of virtual machines. Please refer to the VMware Knowledge Base
for more details on this capability. Do you wish to enable this feature?
[no]
Found a compatible pre-built module for vmsync. Installing it...
Found a compatible pre-built module for vmci. Installing it...
Found a compatible pre-built module for vsock. Installing it...
The module vmxnet3 has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vmxnet3 to override.
The module pvscsi has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=pvscsi to override.
The module vmmemctl has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vmmemctl to override.
The VMware Host-Guest Filesystem allows for shared folders between the host OS
and the guest OS in a Fusion or Workstation virtual environment. Do you wish
to enable this feature? [yes]
Found a compatible pre-built module for vmhgfs. Installing it...
Found a compatible pre-built module for vmxnet. Installing it...
The vmblock enables dragging or copying files between host and guest in a
Fusion or Workstation virtual environment. Do you wish to enable this feature?
[no]
Found a compatible pre-built module for vmblock. Installing it...
No X install found.
Creating a new initrd boot image for the kernel.
vmware-tools start/running
The configuration of VMware Tools 8.6.10 build-913593 for Linux for this
running kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking "/usr/bin/vmware-toolbox-cmd" from the
command line or by invoking "/usr/bin/vmware-toolbox" from the command line
during an X server session.
To enable advanced X features (e.g., guest resolution fit, drag and drop, and
file and text copy/paste), you will need to do one (or more) of the following:
1. Manually start /usr/bin/vmware-user
2. Log out and log back into your desktop session; and,
3. Restart your X session.
Enjoy,
--the VMware team

    Is this page helpful?

    Yes No
    Open in a new window

Support Information

Enterprise Cloud 2.0

Enterprise Cloud 1.0

We appreciate your cooperation in improving the site

Did this FAQ be helpful? If you have any comments, please let us know.

Thank you

Your feedback has been received.

▲