2.2.9. Configuring system logging to your syslog server.

This setting shall be made if you want to transfer logs to your syslog server.
You can configure only one syslog server.

2.2.9.1. Syslogd default value

In the default settings, Syslogd is not configured. So, please configure the relevant one for your environment.
Syslog server required for this menu has been already configured and it isn't displayed.

2.2.9.2. Syslogd setting items

The following items are required for syslodg settings.

Item

Value

Description

Status

(select from the list)

Here, you can choose whether or not you make syslog server settings.

  • Enable: valid (making log transfers to your syslog server.)

  • Disable: invalid (not making log transfers to your syslog server.)

Once the setting is made, this cannot be deleted. Please select [ Disable ] if you want to stop log transferring to your syslog server.

Server IP Address xxx.xxx.xxx.xxx

Enter your syslog server's IP address in decimal notation.

Port

(half-width numeric)

Enter a port number which will receive syslog on your syslog server.

Facility

(select from the list)

Select a Facility Name that is used for identifying log messages on your syslog server.



2.2.9.3. Syslogd Add

  1. Click [ |rp_left_selection| ] from the object screen shown at the left-side of the screen.
    Object ‣ Log ‣ Syslogd

    Click [ Add ] from the Syslogd section shown at the right-side of the screen.

    Click Add


  1. When selecting [ Enable ] at [ Status ], you can enter parameters.
    Enter the setting value and click [ Save ].
    For the details of the setting items, please refer to Setting Items : Syslogd .

    Save Object


  1. Click [ Save Change ] to apply the settings to your device.

    Save Config



2.2.9.4. Syslogd Change(Update)

  1. Click [ |rp_left_selection| ] from the object screen shown at the left-side of the screen.
    Object ‣ Log ‣ Syslogd
    Select an edit target at the section of Syslogd shown at the right-side of the screen, and click the [ Edit ] button.
    Any deleting or copying is not available.

    Click Change


    The table below shows descriptions of each button used at Syslogd .

    Button

    Description

    Edit

    This button allows you to edit the Syslogd value which have already set.
    Syslog settings cannot be deleted. If you want to stop log transferring to your syslog server, please change the Status to [ Disable ] by clicking [ Edit ].

  1. Click [ Save Change ] to apply the settings to your device.

    Save Config

Note

If Status is set to Disabled, objects will not be displayed. Please select a blank object and click the [Edit] button when making changes.