2.2.4.6. Service Group

Following describes how to set up a service group being utilized at a Firewall Policy.
When you would like to set up multiple Service Objects under a same Fiirewall Policy, you need to define it as a Service Group.
Service Group is set from Device Management .

2.2.4.6.1. Default Value

By default, Service Group has not been set up, Therefore, you need to set up one, depending on your environment.

2.2.4.6.2. Setting Items : Service Group

Following describe setting items of a Service Group.

Items

Values

Descriptions

Group Name

(Half-width alphabetic characters & half-width numbers)

Fill in the Service Group name.
You can NOT utilize any two-byte characters, such as Japanese, and the following signs as below:
< > ( ) # ' " , and spaces (blank)

Members

(Service Object)

Select a Group Member among from the existing services or your defined Services.

Comment

(Half-width alphabetic characters & half-width numbers)

Fill in your comment if you like.
Fill in your comment by using less than 225 letters. You can NOT utilize any two-bytes characters, such as Japanese.

Note

Noted that not only the existing service but also all the default services you have defined has been generally sorted as one, when your selecting any member.

Sort Service


2.2.4.6.3. Adding Service Group

  1. Click the Routing from the left-side Object screen.
    Service ‣ Service Group

    Click [ Add ] at Service Group of the right-side screen.

    Click Add


  1. Click [ Save ] after you input the setting value.
    Input Setting Items : Service Group to the setting value.

    Save Object


  1. Apply configuration to the device by clicking [Apply configuration].

    Save Config


Note

  • Please be sure to save the object [Apply configuration] before creating the firewall policy.



2.2.4.6.4. How to Change Service Group (Edit / Duplicate / Remove)

  1. Click the Routing from the left-side Object screen.
    Service ‣ Service Group

    Select the target changed line at Routing screen of the right-side. Click an operation button you need.

    Click Change


    Following describes respective buttons of Service Group .

    Buttons

    Descriptions

    Edit

    Modify the value of Service Group that has already been set.

    Duplicate

    After duplicating the existing Service Group , the object setting screen will open with the same value.
    Make sure to change Group Name.
    This is useful for you to define another Routing with the same value.

    Remove

    Delete the selected Service Group.


    When you change Member , select the target Service Object , and click [ Edit ].

    Change Members


    When you deleting one , the confirmation message will display. Please click [OK] to finally execute its deletion.

    Confirm Delete Object

    NOTE: You can not remove any object which has been utilizing at a Firewall Policy.


  1. Apply configuration to the device by clicking [Apply configuration].

    Save Config


Note

  • Please be sure to save the object [Apply configuration] before creating the firewall policy.