Setting Items of a Destination NAT.¶
Following are setting items of a Destination NAT
Items |
Values |
Descriptions |
|---|---|---|
NAT Name |
（Half-width alphabetic characters & half-width numbers) |
Fill in a Destination NAT.
You can NOT utilize any two-byte characters, such as Japanese, and the following signs as below:
< > ( ) # ' " , and spaces (blank)
|
| External IP Address | xxx.xxx.xxx.xxx | Input the Destination IP Address, according to the decimal system.
The External IP Address will be transformed into the Mapped IP Address.
|
| Mapped IP Address | xxx.xxx.xxx.xxx | Input the IP Address by using the decimal system.
The External IP Address will be transformed into the Mapped IP Address.
|
External Interface |
Port [ 4 - 10 ] |
Select the outer interface with which this address is associated (received communication). |
Port Forward |
Either [ □ ] (unmarking to the checkbox) or [ ✔ ] (marking the checkbox) |
Once you marked to the Port Forward check box, the port forwarding in this object will activate. |
| Comment | （Half-width alphabetic characters & half-width numbers) |
Fill in your comment if you like.
Fill in your comment by using less than 225 letters. You can NOT utilize any two-bytes characters, such as Japanese.
|
Following describe the additional setting items which you checked the Port Forward.
Items |
Values |
Descriptions |
|---|---|---|
Protocol |
TCP or UDP |
Choose the Service Protocol to be port forwarded. |
External Service Port |
(with half-width numbers) |
Fill in the service port number of the External Interface.
You can also specify a Range by connecting by using " - " (hyphen).
|
Mapped Port |
(with half-width numbers) |
Fill in the service port number of the Internal Interface.
You can also specify a Range by connecting by using " - " (hyphen).
|