Address Object : Setting Items.¶
Following are the Address Object setting items.
Items |
Values |
Descriptions |
|---|---|---|
Address Name |
（Half-width alphabetic characters & half-width numbers) |
Input an Address Object Name.
Any two-byte characters, such as Japanese, and the following signs are unavailable.
< > ( ) # ' " , and spaces (blank)
|
Type |
Either [ Subnet ] or
[ IP Range ]
|
Select the definition way for the Address. |
Interface |
Port [ 4 - 10 ] |
Select the interface to which this address will be associated. |
| Comment | （Half-width alphabetic characters & half-width numbers) |
Fill in your comment if you like.
Fill in your comment by using less than 225 letters. You can NOT utilize any two-bytes characters, such as Japanese.
|
The following address are additional setting items when setting up the [ Subnet ] as [ Type ].
Items |
Values |
Descriptions |
|---|---|---|
| IP Address | xxx.xxx.xxx.xxx | Input an IP Address with decimal notation.
e.g. [ 192.168.1.1 ]
|
Subnet Mask |
xxx.xxx.xxx.xxx | Input the Subnet Musk by using the decimal notation.
e.g. [ 255.255.255.0 ]
|
Following are the additional setting items when setting up [ IP Range ] as [ Type ] .
Items |
Values |
Descriptions |
|---|---|---|
| Start IP Address | xxx.xxx.xxx.xxx | Input the Start Address of the IP Range with demacial notation.
e.g. [ 192.168.10.1 ]
|
| End IP Address | xxx.xxx.xxx.xxx | Input the End Address of the IP Range with decimal notation.
e.g. [ 192.168.10.5 ]
|