12.6. Using IP Address Groups¶
12.6.1. Reference to IP Address Group¶
This describes the procedures to find information on vFirewall IP address groups.
1. Click [1] on the Manage Virtual Firewall screen (Filter Rules tab).
2. Click [2] on the Manage Virtual Firewall screen (Addresses tab).
3. The IP address group settings will appear. Please check the below chart (information on the Addresses tab) for contents of each item.
* Information on Addresses tab
| Item | Content |
| a | The identifier name of the IP address group |
| b | The number of IP address objects included in the IP address group |
12.6.2. Adding IP Address Groups¶
This describes the procedures in adding vFirewall address groups.
1. Click [1] on the vFirewall management group (Filter Rules tab).
2. Click [2] on the Manage Virtual Firewall screen (Addresses tab).
3. Click [3] after the existing address group settings appear.
4. The Add IP Address Group screen will appear. Click [4] after entering the required parameters.
* Please check the below chart (input rules in the Add IP Address Group screen) for input rules for each item.
* Input rules on adding IP address group screen
| Item | Input field | Content | Mandatory or Optional | Input Conditions |
| a | Text box | Enter the identifier name for this address group | Mandatory | Up to 40 characters, however, only enter one-byte characters. |
| b | Pull down | Select the address object | Optional | None |
12.6.3. Editing IP Address Group¶
This describes the procedures in editing vFirewall IP address group.
1. Click [1] on the Manage Virtual Firewall screen (Filter Rules tab).
2. Click [2] on the Manage Virtual Firewall screen (Addresses tab).
3. The existing IP address group settings will appear. Click the address group you want to edit.
(For this example click [3] to edit the address group [test_group].)
4. The editing IP address group screen will appear. Click [4] after entering the required parameters.
* Please refer to ‘11.6.2.Adding IP address group Procedure 4 chart (Input rules for adding IP address group screen)‘ for input rules on each item.
12.6.4. Deleting IP Address Group¶
1. Click [1] on the Manage Virtual Firewall screen (Filter Rules tab).
2. Click [2] from the Manage Virtual Firewall screen (Addresses tab).
3. Click the IP address group you want to delete.
(For this example, click [3] to delete IP address group [test group].)
* Please reboot after deleting the address group, as the IP address group cannot be delete if there is a member (IP address object) remaining in the address group.
4. A warning screen will appear. Click [4] after checking the warning screen.
5. Click [5] after checking that the IP address group has been deleted.
6. The task management screen will appear. Click [6] after checking that the task status is ‘completed’ and to finalize the procedure.
7. Click [7] to check the detailed information of the task.
