12.3. Using Static Routing¶
12.3.1. Reference to Static Routing¶
This describes the procedures to find information on vFirewall static routing.
1. Click [1] from the Manage Virtual Firewall screen (Filter Rules tab).
2. Click [2] from the Manage Virtual Firewall screen (Routes tab).
3. The static routing settings will appear. Please check the below chart (information on the Routes tab) for content on each item.
* Information on the Routes tab
| Item | Content |
| a | The identifier name of this static routing |
| b | The sending network address of this static routing |
| c | The gateway of this static routing |
| d | The interface that will be the sender after the applying this static routing |
| e | The validity and invalidity of this static routing |
12.3.2. Adding Static Routing¶
This describes the procedures in adding vFirewall static routing.
1. Click [1] from the Manage Virtual Firewall screen (Filter Rules tab).
2. Click [2] from the Manage Virtual vFirewall screen (route type).
3. Click [3] after the existing static routing setting appears.
4. Click [4] after entering the required parameters. *Please check the below chart (input rules for the Add Static Routing screen) for input rules for each item.
* Input rules for adding static routing
| Item | Input field | Input contents | Mandatory or Optional | Input Conditions |
| a | Text box | Enter the identifier name for this static routing | Required | Up to 40 characters, however, can only enter one-byte characters |
| b | Pull down | Select the sending network address for this static routing | Required | Can select from registered IP address objects |
| c | Pull down | Select the gateway for this static routing | Required | Can select from registered IP address objects |
| d | Pull down | Select the packet output interface after applying the static routing | Required | Cannot route from the same input and output interface |
| e | Check box | Select the valid and invalid static routing | Optional | None |
12.3.3. Editing Static Routing¶
This describes the procedures in editing vFirewall static routing.
1. Click [1] from the Manage Virtual Firewall screen (Filter Rules tab).
2. Click [2] from the vFirewall management screen (route tab).
3. Click [3] after the existing static routing setting appears.
4. Click [4] after entering the required parameters. *Please check ‘11.3.2.Adding Static Routing Procedure 4 * Input rules for adding static routing‘ for input rules on each item.
12.3.4. Deleting Static Routing¶
This describes the procedures in deleting vFirewall static routing.
1. Click [1] from the Manage Virtual vFirewall screen (Filter Rules tab).
2. Click [2] from the Manage Virtual Firewall screen (Routes tab).
3. Click [3] after the existing static routing setting information appears.
4. Click [4] after checking the warning screen.
5. Click [5] after checking that the static routing has been deleted.
6. Click [6] after checking that the task status on the task management screen is ‘complete’.
7. Click [7] to see the detailed information of the task.
