10.1. Referring the Server Segment¶
10.1.1. Referring the Server Segment (Overview)¶
Following is the procedure for referring overview of the server segment.
1. Click [1] on the Manage Enterprise Cloud screen.
2. The Manage Server Segment (Overview tab) appears.
Refer to the following table (information that can be referred with the Overview tab) for contents to be displayed for each item.
* Information that can be referred with the Overview tab
| Item | Contents to be displayed |
| a | Identification name of this server segment |
| b | Number of IP addresses allocated to the interface connected to this server segment |
| c | Number of IP addresses that cannot be allocated to the interface connected to this server segment |
| d | Number of unassigned IP addresses and number of IP addresses retained by this server segment |
| e | Number of unassigned IP addresses and number of IP addresses retained by this server segment |
10.1.2. Referring the Server Segment (IP Address)¶
Following is the procedure for referring the IP address of the server segment.
1. Click [1] on the Manage Server Segment (Overview tab).
2. The Manage Server Segment (IP Addresses tab) appears.
Refer to the following table (information that can be referred with the IP Addresses tab) for contents to be displayed for each item.
* Information that can be referred with the IP Addresses tab
| Item | Contents to be displayed |
| a | IP address belonging to subnet of this server segment |
| b | Status of each IP Address |
| c | Identification name of each IP Address |
10.1.3. Adding the Server Segment¶
Following is the procedure for adding the server segment.
Important
- Adding and editing functions in Customer Portal can be used in the function available Data Center. Please check Enterprise Cloud Service Description “Customer Portal” Chapter.
* Please note that IP address block existence of connection to firewall cannot be changed after adding the server segment.
1. Place the cursor at [1] on the Manage Enterprise Cloud screen and then click [2].
2. The Add Server Segment screen appears. After inputting the necessary parameters, click [3].
* Please note that the billing amount will be changed.
* Refer to the following table (input rules applied on the Add Server Segment screen) for input rules for each item.
Note that there is difference in parameters between vFirewall and Integrated Network Appliance.
<Integrated Network Appliance>
If Server Segment is connected to Integrated Network Appliance
If Server Segment is not connected to Integrated Network Appliance
< vFirewall >
* Input rules applied on the Add Server Segment screen.
| Input field | Input contents | Mandatory/ Optional | Input condition | |
| a | Text box | Identification name of this server segment | Mandatory | Half-width characters (1 to 80 characters) |
| b | Pulldown menu | Number of this server segment | Mandatory | None |
| c | Text box | IP address block allocated to the server segment (/24 to /29) | Mandatory | IPv4 address (decimal notation with dots and prefix 8 to 29)
However, global IP address and IP address range that cannot be overlapped are excluded.
|
| d | Check box | Existence/ nonexistence of vFirewall/ integrated network appliance
(If a check mark is put on this check box, connection of vFirewall/ integrated network appliance is not established.)
|
Optional | None |
| e | Text box | Default value of DNS (primary) | Optional | IPv4 address (decimal notation with dots) |
| f | Text box | Default value of DNS (secondary) | Optional | IPv4 address (decimal notation with dots) |
| g | Text box | DNS suffix | Optional | Half-width characters and “-“”.” (1 to 63 characters), only half-width alphanumerics can be used for the beginning and end, ”.” cannot be used consecutively. |
| h | Text box | IP address of interface of integrated network appliance to be connected | Optional | IPv4 address (decimal notation with dots) |
| i | Text box | IP address of interface of vFirewall to be connected (Active) | Optional | IPv4 address (decimal notation with dots) |
| j | Text box | IP address of interface of vFirewall to be connected (Active) | Optional | IPv4 address (decimal notation with dots) |
| k | Text box | Default value of Default Gateway | Optional | IPv4 address (decimal notation with dots) |
Important
- Equipment other than vFirewall/integrated network application is configured for the IP address of the default gateway of the virtual server (for example, service interconnection GW and L3 device at the collocation side via collocation connection). In this case, customer needs to set the additional static route for the routing table on the guest OS. If the additional static route is not configured, Ping monitoring, which is a standard function of Enterprise Cloud, may not be performed or OS license provided by us may not be activated. Refer to the chapter “Server segment” in the Enterprise Cloud Service Description.
3. The Warning screen appears. Check the warning and then click [4].
4. Confirm that the server segment is added. Click [5].
5. The Manage Tasks screen appears. Confirm that the status of the server segment task is “Complete” and then click [6] to complete.
6. Click [7] to check the further detailed information of the task.
10.1.4. Editing the Server Segment (Overview)¶
Following is the procedure for editing the basic information of the server segment.
1. Click [1] on the Manage Server Segment (Overview tab) after inputting necessary parameters.
* Refer to the following table (input rule applied on the Overview tab) for input rules applied on each item.
* Input rules applied on the Overview tab
| Input field | Input contents | Mandatory/ Optional | Input condition | |
| a | Text box | This item can be used for inputting the identification name of the server segment. | Optional | Half-width characters (1 to 80 characters) |
| b | Text box | Default value of DNS (primary) | Optional | IPv4 address (decimal notation with dots) |
| c | Text box | Default value of DNS (secondary) | Optional | IPv4 address (decimal notation with dots) |
| d | Text box | DNS suffix | Optional | Half-width characters and “-“”.” (1 to 63 characters), only half-width alphanumerics can be used for the beginning and end, ”.” cannot be used consecutively. |
2. Confirm that the server segment is edited. Click [2].
3. The Manage Tasks screen appears. Confirm that the status of the server segment task is “Complete” and then click [3] to complete.
4. Click [4] to check the further detailed information of the task.
10.1.5. Editing the Server Segment (Reserved IP Address)¶
Following is the procedure for editing the Reserved IP address of the server segment.
1. Click [1] on the Manage Server Segment (Overview tab).
2. The Manage Server Segment (IP Addresses tab) appears. After inputting the necessary parameters, click [2].
* Refer to the following table (input rule applied on the IP Addresses tab) for input rules applied on each item.
* Input rules applied on the IP Address tab
| Input field | Input contents | Mandatory/ Optional | Input condition | |
| a | Text box | This item can be used for inputting the Reserved IP address. | Mandatory | Half-width characters (1 to 80 characters) |
| b | Pulldown menu | This item can be selecting the IP address specified as the Reserved IP address. | Mandatory | None |
| c | Check box | Put the check mark on this check box when specifying the range of the Reserved IP address. | Optional | None |
| d | Pulldown menu | This item can be used for inputting the Reserved IP address range. | Optional | None |
3. Confirm that the Reserved IP address is added. Click [2] on the Manage Server Segment (Overview tab).
4. The Manage Server Segment (IP Addresses tab) appears. Confirm that the Reserved IP address is added.
10.1.6. Deleting the Server Segment¶
Following is the procedure for deleting the server segment.
1. Click [1] on the Manage Server Segment (Overview tab).
2. The Manage Server Segment (IP Addresses tab) appears. Click [2].
3. The Warning screen appears. Check the warning and then click [3].
4. Confirm that the server segment is deleted. Click [4].
5. The Manage Tasks screen appears. Confirm that the status of the server segment task is “Complete” and then click [5] to complete.
6. Click [6] to check the further detailed information of the task.
