11.1.4. Adding a Service Group

These steps described here are the steps to set up a service group for vFirewall. Add the parameters listed in the table below in a service group. Follow the steps described below to add setting items to a service group.

Table 41. Information on service group setting
Name Protocol Member
ServiceGroup_Web TCP
HTTP(80)
HTTPS(443)

  1. On the EC administration screen, point the cursor at vFirewall and click on it.
_images/routing_vlb_servicegroup_01.jpg

  1. On the vFirewall administration screen, click on the Service tab. On the screen with the Services tab, click on [Service Groups] to expand it.
_images/routing_vlb_servicegroup_02.jpg

  1. The contents of the setting of the existing service object appears. Click on the plus sign (+) in the lower part on the screen.
_images/routing_vlb_servicegroup_03.jpg

  1. The screen to add a service group appears. Enter the parameters as shown in the table. Click on the Save button in the lower part on the screen.
_images/routing_vlb_servicegroup_04.jpg

  1. Click on the Close button in the upper part on the screen to add a service group to go back to the EC administration screen. In the upper part of the EC administration screen, the task bar of the ongoing processing is shown. Click on the task bar, and make sure that the task is “Complete”.
_images/routing_vlb_servicegroup_05.jpg

  1. After confirming the completion of the task, click on the Services tab on the vFirewall administration screen. Make sure that the IP service group is correctly added.
_images/routing_vlb_servicegroup_06.jpg