3.4.2. Management server (Linux)

* As for the user using the local type, proceed to “Agent for Windows” or “Agent for Linux”.
 This section describes the procedure for installing the central management type management server on the Linux server.
* This section describes the installation procedure for GUI.
(1) Grant the execution permission to the installation module.
$ chmod 755 AcronisCyberProtect_15_64-bit.x86_64

(2) Confirm that the installation module is executable.
$ ls -l
-rwxr-xr-x 1 root root 1726039737 3月  1 17:15 AcronisCyberProtect_15_64-bit.x86_64

(3) Run the installation module.
$ ./AcronisCyberProtect_15_64-bit.x86_64

(4) When the following screen appears, select “Next” and then press the [Enter] key.
../../../_images/146.png

(5) When the license agreement screen appears, select “Accept” and then press the [Enter] key.
../../../_images/240.png

(6) Select “Next” and then press the [Enter] key while keeping the default setting.
  * If not acquiring backup of the management server, the check box for “Agent for Linux” need not be checked.
../../../_images/327.png

(7) Select the port used for the management server. In this case, select “Next” and then press the [Enter] key while keeping the default setting.
../../../_images/422.png

(8) Select the port used for communications between components. In this case, select “Next” and then press the [Enter] key while keeping the default setting.
../../../_images/522.png

(9) Please wait until install is completed.
../../../_images/617.png

(10) When the following screen appears, install is completed. Select “Exit” and then press the [Enter] key.
../../../_images/717.png