3.4.5. Agent for Linux

If the backup target server is Linux server, install the server according to the following procedure.
* This section describes the installation procedure for GUI.
* In case of using the centralized management type, SSH needs to be permitted at root.
(1) Grant the execution permission to the installation module.
$ chmod 755 AcronisCyberProtect_15_64-bit.x86_64

(2) Confirm that the installation module is executable.
$ ls -l
-rwxr-xr-x 1 root root 1726039737 3月  1 22:25 AcronisCyberProtect_15_64-bit.x86_64
(3) Run the installation module.
$ ./AcronisCyberProtect_15_64-bit.x86_64

(4) When the following screen appears, select “Next” and then press the [Enter] key.
../../../_images/138.png

(5) When the license agreement screen appears, select “Accept” and then press the [Enter] key.
../../../_images/236.png

(6) As for the local type configuration, select “Next” and then press the [Enter] key while all components are selected. Implemention of the management server is required for Acronis 15.
As for the centralized management type, proceed to the step (9).

../../../_images/323.png

(7) Select the port used for the management server. In this case, select “Next” and then press the [Enter] key while keeping the default setting.
../../../_images/418.png

(8) Select the port used for communications between components. In this case, select “Next” while keeping the default setting.
Proceed to the step (11).
../../../_images/518.png

(9) As for the centralized management type, the management server has already been implemented in another server so that remove the check mark from the “Management Server” check boxes and then press the [Next].
* “Agent for Linux” and “Rescue Media Builder” are required.
../../../_images/613.png

(10) Enter IP address of the management server and password on the following screen, and then select “Next” and then press the [Enter] key.
../../../_images/713.png

(11) Please wait until install is completed.
../../../_images/89.png

(12) When the following screen appears, install is completed. In this case, press the [Exit].
../../../_images/99.png