2.4.2. Management server (Linux)

* As for the user using the local type, proceed to “Agent for Windows” or “Agent for Linux.”
 This section describes the procedure for installing the central management type management server on the Linux server.
* This section describes the installation procedure for GUI.
① Grant the execution permission to the installation module.
$ chmod 755 AcronisBackup_12.5_64-bit.x86_64

② Confirm that the installation module is executable.
$ ls -l
-rwxr-xr-x 1 root root 1097707464 Nov 8 16:20 2017 AcronisBackup_12.5_64-bit.x86_64

③ Run the installation module.
$ ./AcronisBackup_12.5_64-bit.x86_64

④ When the following screen appears, select “Next” and then press the [Enter] key.
../../../_images/120.png

⑤ When the license agreement screen appears, select “Accept” and then press the [Enter] key.
../../../_images/219.png

⑥ Select “Next” and then press the [Enter] key while all components are selected.
  * If not acquiring backup of the management server, the check box for “Acronis Backup Agent for Linux” need not be checked.
../../../_images/311.png

⑦ Select the port used for the management server. In this case, select “Next” and then press the [Enter] key while keeping the default setting.
../../../_images/49.png

⑧ Select the port used for communications between components. In this case, select “Next” and then press the [Enter] key while keeping the default setting.
../../../_images/59.png

⑨ Please wait until install is completed.
../../../_images/67.png

⑩ When the following screen appears, installation completes. In this case, select “Exit” and then press the [Enter] key.
../../../_images/77.png