1.4.5. Creation of Bootable media

You need Bootable Media when you have to restore because of problem of server for backup.
You have two ways.
You create a Bootable Media / You download from Acronis web-site.
We recommend that you create a Bootable Media when you are preparing backup. If you have a Bootable Media, you can restore any server with it. However, when you create a Bootable Media in a server which you want to restore, you can restore easily because server information is registered.
We strongly recommend you take a note of vNIC information such as NIC number, IP address, MAC address and more in advance.

1.4.5.1. Create Bootable media at server

If you are connectable to the Internet, you can create a Bootable Media in respective servers for backup.
Both Windows and Linux are same procedure to create a Bootable Media.
After created, you have to copy the Bootable Media to computer for ECL console.
We hope that you will keep the Bootable Media carefully.
You need to use the Bootable Media when you restore
1.You need to install component of Agent for Windows before you create a Bootable Media. You boot management console of Acronis and select ‘Create bootable media’ in ‘Tools’ tab.
../../_images/image67.png
2.Below screen is displayed and Click ‘Next’ button.
../../_images/image68.png
3. Select ‘Default (Linux-based media)’ in ‘Bootable media type’ Then, select suitable either Windows server or Linux server. After that, click ‘Next’ button.
../../_images/image69.png
Bootable media type is not relative to server type. Representation is only relative to server type.
4.Click ‘Next’ button.
../../_images/image70.png
5.Select component of 32bit or 64bit and click ‘Next’ button.
../../_images/image71.png
You have to select your server OS type. It is possible to select both types.
6.Click ‘Next’ button.
../../_images/image72.png
You can change Network setting after CD boot. Refer to documents of Acronis if you want to know in detail.
7.Below screens are displayed and click ‘Yes’ button.
../../_images/image73.png
8.Click ‘Next’ button.
../../_images/image74.png
9.Select ‘ISO image’ and click ‘Next’ button.
../../_images/image75.png
10.Select saving destination of ISO file and click ‘Next’ button.
../../_images/image76.png
11.Confirm contents and click ‘proceed’ button.
../../_images/image77.png
If you create a Bootable Media at the server for restore, you do not need network setting when you restore because Bootable Media retains IP address of the server.
12.You have to copy the Bootable Media to computer for ECL console.
We hope that you will keep the Bootable Media carefully. You need to use the Bootable Media when you restore.

1.4.5.2. Download Bootable media from Acronis web-site

If you are unconnectable to the Internet, you can download a Bootable Media from Acronis web-site (My account site).
We hope that you will keep the Bootable Media carefully. You need to use the Bootable Media when you restore.
1.Login Acronis web-site (My account site) from computer for ECL console. Click ‘Download’ button where download screen of install media in ‘Bootable Media’ tab is.
../../_images/image78.png